Turbaso's Build

Hello,

I m new in the forum and i start doing my own 2dof seat mover based on the sck gaming project(great video).

I m looking for suitable motors with autolovking system when they are power off i contact with a manufacter who send me this motor what you think about

This weekend if i get all the shipments... i will start with th 2dof seatmover

I start with the 2dof seat mover.
With the sketch of https://www.xsimulator.net/communit...ial-pid-motor-driver-sketch-w-softstart.9277/

I configure the smc3 and the motors moves perfect but i cant move them with simtools.

I think my problem is a comunication issue between arduino and simtools i try all this options and only moves in one... when i restart the aduino and open simtools

Im using arduino uno r3 and sabertooth 2x32 set it up to 115200 bauds.
But no results with simtools, also i have most of time issue conection with the smc3 for the first time i boot.

Then works perfect, i try modifying the com port to 20 with similar result.

I don t change nothing in the sketch.

I hope someone could help me

Thanks!!

Yes of course.
If is need more info when i arrive home i will send

Im using the one you post in port com 20

Yes at night i will be posting the picture

first of all thanks for your replies

this is how now is configured, with no results

I try all as describe working in smc3 but not in simtools with the firewall disable.

Also some times need more than one plug and unplug to be detected by smc3 tools but never with simtools.

I will try this afternoon i never read about the issue of the language so i will try and post

Also i order a arduino mega that it should arrive by the end of the week, so i will be trying also 1ms output

I will be adding more images when it finish

No Way!

I found the issue

I don t say that i was running simhub, who was scanning all the arduinos connected to the pc. that was the reason some times smc3 does nt recognize the arduino and others yes

thanks for answering it was my mistake don t saying nothing about running simhub for the bodyshakers

Today arrive a more powerful psu and the damper i pretend to use to reduce the slack of the wormgear