2DOF Wiper Sim from Interview 2010

Re: 2DOF Wiper Motion Projekt Protocol by Interview 2010

hmm i don't know sorry i use digitus

Re: 2DOF Wiper Motion Projekt Protocol by Interview 2010

it may be the much-calibrated my power supply is too weak? (9V 600mA)
otherwise I try it here http://cgi.ebay.ca/PC-USB-RS232-Module- ... 3f04f07f5f
like you said.


(This also works for Windows 7?)

thanks

Re: 2DOF Wiper Motion Projekt Protocol by Interview 2010

I've looked at photos you posted in my thread and just in case you don't see my answer there, I will say it here also:

YOU NEED TO CHANGE THE WAY THE MAX232 IS INSERTED. YOU INSERTED IT WRONG WAY, TAKE A NEW ONE AND FLIP IT 180 DEGREES!

Or you can try with the one you have already, maybe it's not dead

This is why you should post all your stuff in one thread, many people don't read all posts in every thread, but on the other side, many of us do read everything (lucky you )

Re: 2DOF Wiper Motion Projekt Protocol by Interview 2010

can anyone explain how I can test my AMC board now?

I connect my board to my pc ...

and then i start forcender ... and click try send data... and than i start profiler...

load a finish profil from pointer for wipers..

and than i click start and when i move the calibration offset... are my axis only 128 !!

igor or frakk can u help me please :

:clap: :yippiee: :yippiee: :yippiee: :yippiee: AMC works!!!!!! NOW!!! thanks frakk and igor :-* :-*

Glad to see you've managed to get it working :thbup: :clap:

Hi Interview, hi Frakk & hi all, I hope not too much to ask ... a good soul who placed a final version and list of PCB components Tronic's AMC DSMhb and maybe in one post? unfortunately I read and reread the forum and I always find different versions! I would like to make a 2 DOF SIM SFGT wiper motors with 12 V, I thank all

@ Interview ps you could post a summary of what you used in the final?
sorry, my english is very bad!!! ihihihi = Google traslate!

@ micma80
I've used the boards from opening posts for AMC and DSMhb.
They are correct ones, and you can create exact part list by looking at board silk layer like I did.
Most of us needed to read all the posts which can be frustrating, but at the end, result will be operational sim

you can look my first post..

thanks fermevc, I will try to do it !!! Although I have already read a lot, I will continue !!!
regards
micma80

thanks Interview ... I try to make it!
regards
micma80

on my first post you 6find all data.... and more (all parts.. + all updated!!)

have fun

why stinks my amc board sometimes? whenever my LM2940CT is very hot!

plz help

why stinks my amc board sometimes? whenever my LM2940CT is very hot!

plz help

Where has your board been?

Did your cat/dog pee on it?

How hot is the regulator and when is it hot?

@ Interview
Von wo hast Du die schönen rot-blauen Kabeln her? wieviel qmm2 haben die.

I'm using separate power for LCD, so my LM is cold as ice.
Maybe you have some flux left on PCB, and if your LM is so hot as you say, that could be the smelly thing
Another thing you could try to lower the temp of LM is to use 6V PSU. I'm using an old AT PSU (not ATX) and it gives 5.6V, so my LM is dong very little work and stays cold (I could probably power the LCD from AMC as well).

i use 9V 1000ma

it is rarely hot!

I know not only why!

(Now I run my simulator brought to have now moved on ...) very nice

coming soon...

if I move the calibration to the left and right, move both motors!

is that correct?