wiper motor

hi guys!

i am searching for a wiper motor with come certain characteristics but wasnt able to find one.. maybe you can help me...

1) 12 V
2) at least 40 W
3) rotatory output after the gearbox (some have the 90° angle motion.. )
4) shipment from europe
5) at least 5 cm long output axle.
6) strong steel etths in the gearbox.. the new ones are all made out of plastics and break


any idea?

thanks

igor

Hi Igor,

It may worth to take a look on these:
http://ankarsrum.sitedirect.se/website1 ... _web08.pdf

They are used in other applications but the KSV 4030 model with selflocking and aluminum gearbox might be interesting...
(Link was sent to me by Ferrari_man, thanks)

Regards, Thanos

hey, thats exactly what i need! thank you!

do you have some informations on the price? wasnt able to find it on the site.

thnx

igor

Hey... I have found this site where they have a lot of these strong wire motors... I havn't been able to find out which one have selflocking ... (time issue).. but here is the link. They have 3 different brands ...

http://www.cooptim.hu/main.php?language=en

products -> Wire feed motor

Ferrari_man

Thanks Ferrari_man!!!!

From the site you mention i found these motors that are 24volt and are good in price too! I can't tell if they have selflocking...

Motor : KSV 5035/551 --> 57,00 €
Voltage: 24 V
Speed: 200 rpm
Input power: 120 W


Motor : KSV 4030/182 --> 26,25 €
Voltage:24V
Speed: 200 rpm
Input power:40-65W


Regards, Thanos

Hey again.

I have one of these;
KSV 5035 / 692
42V 0713 with a optisk encoder
It is from a danish welder company. Very strong motor, but it don't have selflocking so I guess its worthless to my simulator (frex system)

EDIT:
I also have one of these.
KSV 4030/219
24V W0216

It has plastik gearbox and also don't have selflocking

Ferrari_man

Hello guys,

today I got a starter motor car, and I dismounted, it run, Thanos've tried to use them better than wiper motor, more torque?
It would have more power to my simbike. Need a good source of power, 2 batteries car
You think you can so DSMH power?
You've proven with these starter engines, what do you think?

Thanks
Monast

I wrote to ankarsrum about the motors Thanos suggested and got these gear ratio. Does anyone ones if they would work.


Motor : KSV 5035/551 --> 57,00 € have 1:24
Voltage: 24 V
Speed: 200 rpm
Input power: 120 W


Motor : KSV 4030/182 --> 26,25 € have 1:37
Voltage:24V
Speed: 200 rpm
Input power:40-65W

They suggested this motor for the best ratio for selflocking

Motor KSV 4030/801..... with ratio 1:125
Voltage 42V
Speed 80 rpm

I havn't got a price from them yet, only the ones from the link
http://www.cooptim.hu/main.php?language=en
Ferrari_man

Hi Ferrari_man,

I still think that is better to use these motors:

Motor : KSV 5035/551 --> 57,00 € (have 1:24)
Voltage: 24 V
Speed: 200 rpm
Input power: 120 W

They are fast enough (three rotations per second!) and two times stronger than the simple wiper motors I use!! Plus its more easy to power them with 24volts instead of the 42volts that the KSV 4030/801 motors are require!

Regards, Thanos

Hey Thanos

I wrote to Ankarsrum again about the two motors I have at work, and ask what the ratio was on them.

KSV 5035 / 692 it has 1:24 in ratio and this one is very easy to turn (without a tool)
42V 0713 with a optisk encoder

KSV 4030/219 it has 1:37 in ratio and is harder but still not enough (but I have to use a tool to turn it)
24V W0216

So I don't think we can use this one:
Motor : KSV 5035/551 --> 57,00 € (have 1:24)
Voltage: 24 V
Speed: 200 rpm
Input power: 120 W
..
I have found a new site with a lot af wipermotor and with all the datasheet (I think they use these on toyotas)
http://www.valeo-swf-motoren.de/index.php

I am trying to find a perfekt one here...
ferrari_man

What about this motor then?

http://www.valeo-swf-motoren.de/html/sh ... _sprache=2

Regards, Thanos

I dont know about the 43:3 ratio? (I am new to gearing)

Would it be good to take one with encoder?

Regrads
Ferrari_man

Hi

They using 43/3 to have a round number on their ratio. Its means that for every 43 turns of the motor's axle they get an output of 3 turns on the geared output axle.

Roughly its 14.333333333333334 / 1 (but it doesn't do a nice round number isn't it?)



Regards, Thanos

Hi Thano

I want to know if there are cheap 12V wiper motor to use with your simulator and in particulat enough fast!!

I use micra wiper motor, but seems to be slow !
waiting for answer
regards Stefano

HI ALL
we have machine (submerged) type esab
and we have a problem in wire feed motor(ksv 5035/735) 24v we would like to help us
the problem IS
ERROR IN MOTOR CONTROL UNITE 0
ERROR NR :186
NO ENCODER PULSES M1

we thank you in advance and we are looking forwards to hearing from you soon

Best Regards