Thanos Controller PROBLEM!! HELP

hello,

I just flashed my amc! (By thanos his instructions) 22Mhz

when the flash process was finished there was setup KP TIP: USE TERMINAL

then I made then the AMC on and off and now stands 128 128 1023 1023 pwm v1.0 JoyR

you can help me thank you

plz help :

What is the problem?

AMC 1.5 setup KP TIP: USE TERMINAL ... and LCD much too light I see very bad,,

Turn DIP1 switch to 0... and what kind of LCD you have? Its a blue one??

yes its bule one... dpi to 0 = 128 128 10231023
2 PWM v1.0 JoyR

and when dpi = 1 (22 PWM v1.0 JoyR)

and when i start the amc on lcd.. (KPY3 KPX3 22 PWM v1.0 JoyR)

I've tried ... helps but not much ..

(it is just dark or too light)

Have you used a 10K pot? Do you have a link of the datasheet of the LCD?

yes i use 10k pot linear, lcd is here: http://www.reichelt.de/?;ACTION=3;LA=50 ... 8883ecfbaf

and is my amc right flashed now? and how i can change from JoyR to SFGT?

thanks tronicgr

mayby is that right...

Its not right... look here for correct connection...

amc1-5-connection-problem-t1440.html#p13837

and is my amc right flashed now? and how i can change from JoyR to SFGT?

thanks tronicgr

With dip switch 3 ... read the manual please!!! lol

download/file.php?id=612

okay i read and now next problem...

I have a potentiometer connected when I move it is nothing on the lcd just want the number 1023


EDIT:

pictures:
---------------------------

LCD----> a number is missing! when dip=0 are bought number on the LCD!!!!!!!



LCD board

AMC boeard