Riton' 2DOF with AC gearhead motors

Re: Riton' 2DOF project with AC gearhead motors

I have a problem, and I do not know how to fix this problem:
sometimes when I play for some time, the simulator goes alone stop, the simulator stop, I must press start again, why?

Re: Riton' 2DOF project with AC gearhead motors

why software disconnect and stop the simulator ??
no ideas?
thanks

Re: Riton' 2DOF project with AC gearhead motors

I think there has been an issue with the pnp option. Try to disable it, and see if it works better.

Re: Riton' 2DOF project with AC gearhead motors

thank you very much, I will try tomorrow ....

Re: Riton' 2DOF project with AC gearhead motors

I tried with PNP on (default) then I have removed (off)
I have the same problem, the Profiler goes off, I must once again press start.

I use the latest version

Re: Riton' 2DOF project with AC gearhead motors

lot of video on youtube:
http://www.youtube.com/watch?v=dV09pQvCG0s
http://www.youtube.com/watch?v=CZEipkP7M1I

Re: Riton' 2DOF project with AC gearhead motors

Here is the latest video.
I approach perfection, I have improved the effect and doubled the speed to get from 0 to 10v on my frequency.

I must further refine the effects, vertical force is too strong, from time to time it disturbs the effect is not very good

http://www.youtube.com/user/ritonriton3 ... AVmkHEsWT4

http://www.youtube.com/user/ritonriton3 ... S0ATanH0B4

Re: Riton' 2DOF project with AC gearhead motors

my simulator is really well,but I have always the problems with x sim, it's disconnect .

X sim stop, stop button and stop the simulator, why? Did you have a idea ?

it happens often if I remain without moving, or if I made the move draft

if I drive fast, no problem, against if I drive slowly, sometimes it disconnect and stop the simulator

Re: Riton' 2DOF project with AC gearhead motors

new video, test with my projector

http://www.youtube.com/watch?v=_uaowgKcHEg

http://www.youtube.com/watch?v=nGi1fEBtLJg

Re: Riton' 2DOF project with AC gearhead motors

le simulateur cherche sa position centrale et est sencé s'arrêter, j'ai réglé la matrice dans outpout pour ça, arrêter tout en off les moteur off, et la vitesse off.

le problème c'est que le centre c'est 50% de laxe, 49% c'est pas bon et 51% non plus , alors faut être vachement fort comme simu pour s'arrèter pile au centre!!
du coup le simu fait le yoyo et s'arrète jamais au centre!

alors on a un réglage de sensibilité du pad ou de la mesure de position de l'axe, c'est bien mais ça fait pas grand chose a part diminuer la précision, ça régle pas le probléme.
la réactivité de l'axe non plus ça met juste du retart a l'effet, ou plutot du retard au changement d'état, le temps de réaction entre 2 infos de mouvement.

est il possible d'avoir une zone neutre réglable entre 47 et 53, c'est le centre, comme ça il serait à 0 et pourrait s'arrêter sans faire le yoyo!!

sans ce truc la je voie pas comment éviter ce yoyo, la marge de manoeuvre est trop courte!faudrait trouver un accéléromètre avec un réglage de ce genre a la limite pour compenser ce manque

vos avis?

Re: Riton' 2DOF project with AC gearhead motors

sorry for this french message, but , its difficult for me to make a good explication in english :

when my simulator is at the center, my axis are 50%
but when I press start, the simulator can not stop in the middle!
it moves constantly! around the center

it's too hard to stop at 50% clear, impeccable, it's impossible!

I need to set a dead zone between 47% and 53%
is that possible, or how to stop the simulator at the center without moving?
thank you

Re: Riton' 2DOF project with AC gearhead motors

i test a new profile...
http://www.youtube.com/watch?v=2F8vcPu5mgQ

Re: Riton' 2DOF project with AC gearhead motors

http://www.youtube.com/watch?v=BExo2T_D6pY

Re: Riton' 2DOF project with AC gearhead motors

new video with sim x 2.1.04 beta
I always the problem: simulator disconnect, or X sim disconnect and stop the simulator....
the simulator stop alone, is painful!
have you a solution for this problem that has lasted long with me?
thank you

http://www.youtube.com/watch?v=HBJ3BosKfts

Re: Riton' 2DOF project with AC gearhead motors

some pictures of the progression:
I painted the simulator, and I make over the top of the simulator.
I make a frame to stiffen the bottom of the simulator

Re: Riton' 2DOF project with AC gearhead motors

news:

Re: Riton' 2DOF project with AC gearhead motors

Sweet! I like it

Re: Riton' 2DOF project with AC gearhead motors

News:
blasting and painting, the end soon!

Re: Riton' 2DOF project with AC gearhead motors

Re: Riton' 2DOF project with AC gearhead motors

Nice Platform!
Do you use inverters?
Do you use an analog input to the inverters?
I have inverters on my motion controller.
I uses 0-5V input ,an must use -100% in dynamical speed control for both left and right direction to get my motion running smootly.