Some Question about motor

If i just add 2x 50W Aura under the seat. Will it have good effect on flight sim? If i only use sound card output signal for the source of Aura.
Will it have good effect on Flight Sim?

SimVibe doesn't support flight sims but there is another program that does support DCS called SimShaker http://dreamsimteam.blogspot.ru/p/downloads.html

It only supports 2 transducers, a left and a right, I haven't used to personally but I have a friend who runs it. I will be giving it a go on my setup soon.

If you are just using game audio then it is a bit more muddled but you should still get some of the bigger effects like engine and landing gear.

2 Auras under the seat should be okay. You want to get them as close to the seat as you can because they are not very powerful. Ideally bolt them directly to the seat if it is fibreglass, if not then make a bracket right under the seat.

SimShaker and SimVibe also not support my FSX/P3D~ I am planning to use normal Sound card output signal.
And using Low Pass Filter to make my Shaker work. Just order 2x aura and 1x JBL 250W RMS subwoofer amp. board(disassemble from JBL RS10).
What Hz should i set on the LPF setting?

According to this site the usable frequency range of the Aura is 20-80Hz. So if you set your LPF to 80Hz then you should be okay.

http://www.bassshakers.com/compare-bass-shakers/#.Vz4oYZFcRBc

Already test with my Amp and shaker~ It Great even i just install one on the seat.
Still waiting my parts for building for my motion sims.

My RS10 250W RMS/400W Max Amp. Can push arround 4-5 Aura 50W


Cost 81USD including shipping in China.


Install one for testing. Will install more in motion sims seat~~After try it, i think it MUST in my Sims seat!!!

Wowo~~Testing with my Yoke, throttle and pedals.....The feeling is RIGHT!!! It make all things have life.......Just Re-order 3 more and mount on it....LOL