Request (Feature) Share your Profiles!?!

Can we have a Section to share SimTools Profiles ?
I´d like to see how profiles of other Members feel!

Cheers
Kai

Good idea, just remember that each persons sim and profile may not match yours, but always good to have a look at another profile as you can fiddle with it yourself to suit your setup.

It´s always good to have some new input!
sure every setup is different, but this can made clear in the starting post.

we should use the arrangment from the SimTools Game Engine Presets!
Simforce Gt...etc

good idea, but it can be done with adding a few parameters
would come to math,like actuator speed,distance an actuator arm travel,
how many of dof and ...
some more experienced member could make decision and standard
these parameters
Hooshang

Sharing is as simple as copy/paste a single file
plus it's a readable text file!
SimTools is great!!

I thought you didnt use simtools....

@bsft: yes, I used Xsim just like many of us... until I beta-test SimTools
since that moment, I prefer SimTools!
- silent background running,
- light install (less than 4 Mo versus 80Mo),
- simplier,
- no crashes,
...

http://www.xsimulator.net/community/threads/2dof-foot-motor-mount-jrk-sim.4899/#post-47364 i put some profile info here

same for me I made several simtools profiles quite easily from scratch where as before i could not with x-sim. x-sim is also a great software but a bit too complex in certain aspects.

let s share profiles

sharing profiles is all fine and dandy, but comments come back like "I cannot feel anything" , "motors are going the wrong way" , " can you re-write the profile to suit my setup" , etc.
I wrote a doc helping to write profiles,
http://www.xsimulator.net/community...-set-up-simtools-jrks-and-write-profiles.112/
Just skip part the JRK setup bit
Spend time writing your own.

It's hard to share profiles when there are so many different motor types, their positions, mounts, controllers etc..

And of course there is no guarantee that you will like someone else's setup, you could find it harsh or very smooth or something other and eventually you will end up making your own profile.

there is always some of us thatt wont be able to create their own profile . it was my case few years ago with x-sim. so already made profile might help some

however simtools is so easy to use the learning curve is fast and easy . it is also possible that i learned the hard way with x-sim that simtools looks (to me) like a breeze.

so at the end of the day , profiles could be shared at request between members, i guess !